Justice Series Progressive Cavity Auger and Hopper Pump
The Justice Series Open Hopper Progressive Cavity Pumps represent an ideal pumping solution for viscous solutions and those with high solids contents such as sludges and slurries, wine must, food waste, polymers, pulp and paper, brewing mash and mash-tun removal and other low-flowability pumping mediums that other pumps would have difficulty pumping.
The Justice Series offers a heavy-duty auger mated to a rotor and stator for the most difficult progressive cavity pumping applications.
Our hopper-enclosed auger feed design forces the liquid toward the rotor and stator so it can fill the cavities and then pump. The heavy-duty hopper has slanted sides so the medium pours towards the auger. Custom hopper and auger designs are available for installations where you need bigger hoppers.
The modular design of the Justice Series Open Hopper Progressive Cavity Pump is a hardened pinned-joint drive assembly with a suction body available in steel or 316 stainless steel and internal wetted components in either stainless steel or hardened tool steel with hard chrome plating for long-life and durability in abrasive pumping applications.
Rotors and Stators for the Justice Series are available in 1, 2, and 3 stages representing 75, 150, and 225 PSI discharge pressures with stators available in Buna Nitrile, Viton, EPDM and Natural Rubber. The standard seal design is a set of gland packing with a lantern ring and flush connections. Mechanical Seal options are readily available.
Contact a Liberty Process Equipment engineer today with your application information and we'll be glad to see if the Justice Series is the PC Pumping solution you're looking for.
Justice Series - LJ - Technical Data
- FLOW RATE 0 - 293 GPM
- PRESSURE 0 - 225 PSI
- SEAL OPTIONS Standard, Mechanical
- BASE OPTIONS Custom Bases and Packages available
- ROTORS Tool and Stainless Steel, Chrome Plated
- STATORS Buna/Viton®/EPDM/Rubber
- Large Hopper
- Welded Auger
- Hardened Joints
- Packing or Mechanical Seal
- 3-Stage Options
- Steel or Stainless Steel
Pumps and pump parts offered for sale by Liberty Process Equipment, Inc. are made in the United States, Germany, India, Spain, Argentina and Brazil.
*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.